• Modell Nr.: FST-500
• Anwendung : High-Performance-Transducer , Drei Phase Transducer , Allgemeine Transducer , High Frequency Converter Transducer
• Ausgabetyp : Dreifach
• Prinzip der Arbeit : V / F Control Transducer
• Switch Mode : PWM-Steuerung
• Hauptschaltkreistyp : Spannung
• Spannung der Stromversorgung : Low Voltage Variable Frequency Drive-
• Link der Transformation : AC-DC-AC-Variable Frequency Drive
• Art der DC-Strom : Spannung Variable Frequency Drive-
• Funktion : Einfache Art

• Trademark: Anyhz OEM
• Packing: Carton
• Standard: 1 pcs per carton
• Origin: China
• HS Code: 85044099
• Production Capacity: 6000

Technology 
 

Performance Characteristics
Output Rating (HP)	0.25 - 10HP
Input Voltage	1*230VAC | 3*230VAC | 3*380-480VAC
Operating Control Modes	V/Hz | V/F control,SVC control
Communication Interfaces	RS232 / RS485 | Modbus
Certifications	CE Marked to EN61800-3 (EMC Directive) |
Operating Temperature (C)	0-40C (derate up to 50C max)
Operating Temperature (F)	32-104F (derate up to 122F max)
Operating Altitude	Up to 1000m ASL (derate > 1000m)
Overload Ratings	150% for 60s

Application:
Packing machine, Dumpling machine, Food mixing machine, Milling machine, Drilling machine, Painting machine,  Wood-working machine...

Technology Features
Control Mode: V/F control, Open-loop vector control(SVC)
Overload Capacity: 60s with 150% of rated current; 10s with 180% of rated current.
Starting Torque: 150% of rated torque at 0.5Hz/(SVC)
Speed Adjusting Range: 1: 100 (SVC)
Speed Accuracy: ± 0.5% of maximum speed (SVC)
Carrier Frequency: 0.5K~15.0KHz

Function Features
16-bit microprocessor controlled PWM output
Automatic torque boost and slip compensation
Output frequency 0.1-400Hz
8-step speed control, 7-step process control
Low-noise carrier frequency up to 15kHZ
2 accel. /decel. Tim S-curve
Process follower 0-10VDC, 4-20ma
Communication interface RS-485(bAUD RATE 38400)
Energy saving automatic voltage regulation
Adjustable V/F curve Simple vector control
Automatic adjustment of accel/decel. Times
PID feddback control
Simple position function
O speed holding function
Sleep Irevival function build in

I/O Features	Input Voltage Range	380/220V±15%  Single or 3 phase
	Input Frequency Range	47~63Hz
	Output Voltage Range	0~rated Input voltage
	Output Frequency Range	0~400Hz
	Output Power	0.4KW-7.5KW
Control characteristics	Control System	SPWM (Sinusoidal Pulse Width Modulation)control (V/F or sensorless vector control)
	Freq. Setting Resolution	0.1Hz
	Output Frequency Resolution	0.1Hz
	Torque Characteristics	Including the auto-torque, auto-slip compensation; starting torque can be 150% at 5.0Hz
	Overload Endurance	150% of rated current for 1 minute
	Skip Frequency	Three zones, settings range 0.1-400Hz
	Accel/Decel Time	0.1 to 600 seconds (2 independent settings for Accel/Decel Time)
	Stall Prevention Level Frequency Setting	20%-200%, Setting of Rated Current
	DC Injection Braking	Operation frequency 0-60Hz, output 0-100% rated current Start time 0-5 seconds, stop time 0-25 seconds
	Braking Torque	Approx. 20% (up to 125% possible with option braking resistor or braking unit externally mounted)
	V/F Pattern	Adjustable V/F pattern
Frequency Setting	Keypad	Keypad®®
	External Signal	Potentiometer-5KQ/0.5W, 0 to +10VDC; 4 to 20mA, RS-485 interface; Multi-Function Inputs 0 to 5 (7 steps. Jog, up/down)
Operation Setting Signal	Keypad	Set by RUN, STOP
	External Signal	2 wires / 3 wires (Run, Stop, Forward / Rev, ), JOG operation, RS-485 serial interface (MODBUS)
Operating characteristics	Multi-Function Input Signal	Multi-step selection 0 to 7, Jog. accel/decel inhibit, first to forth accel/decel switches, counter,
		PLC operation, external Base Block (NC, NO), auxiliary motor control is invalid, ACI/AVI
		selections, drive reset. UP/DOWN key settings, sink/source selection
	Multi-Function Output Indication	AC Drive Operating, Frequency Attained, Non-zero, Base Block, Fault Indication,
		Local/Remote indication. PLC Operation indication. Auxiliary Motor Output, Driver is Ready,
		Overheat, Alarm, Emergency Stop
	Analog Output Signal	Analog frequency/current signal output.
	Alarm Output Contact	1Form C contact or open collector output.
Operation Functions	AVR. S-Curve. Over-Voltage. Over-Current Stall Prevention, Fault Records. Adjustable Carrier
	Frequency, DC Braking, Momentary Power Loss restart, Auto Tuning, Frequency Limits,
	Parameter Lock/Reset, Vector Control, Counter. PID Control, PLC, MODBUS Communication, Reverse Inhibition, abnormal reset,
	abnormal re-start, digital frequency output, sleep/revival function, 1 st/2nd frequency source selections
Protective Functions	Self-testing, Over Voltage, Over Current, Under Voltage, Overload,
	Overheating, ExternalFault, Electronic thermal, Ground Fault.
Display Keypads	6-key. 4-digit. 7-segment LED. 4 status LEDs, master frequency, output frequency.
	Output current, custom units, parameter values for setup, review and faults,RUN, STOP, RESET, FWD/REV
Environment conditions	Protection Level	IP20
	Pollution Degree	2
	Installation Location	Altitude 1,000m or less, keep from corrosive gas. liquid and dust
	Ambient Temperature	.-10°C to 40°C (-10°C to 50°C without blind plate) Non-Condensing and not frozen
	Storage / Transportation Temperature	-20°C to 60°C
	Ambient Humidity	Below 90% RH (non-condensing )
	Vibration	9.80665™^ (1G) less than 20Hz. 5.88m/s 2 (0.6G) at 20 to 50Hz

Trade terms
a. Delivery term
We will delivery for you after you done the full payment within 3 to 15 working days.
b. Payment
For small order by air or by express, it is 100% T/T in advance.
For large order by ocean, 30% deposit of the order value should be paid, 70% of the balance payment should be done before delivery
 
R&D Capacity:
Quality and R & D is the key to sustainable development of enterprise vitality. With a strong technical force in the R & D team, Anyhz always views technical innovation as the soul.
I/O Features
Input: 6 digital inputs, 2 analog inputs
Output: 1 analog, 1 digital, 1 relay

» » »