• Modell Nr.: CDI-E180G315/P355T4
• Anwendung : High-Performance-Transducer , Drei Phase Transducer , Allgemeine Transducer , Einphasen-Transducer , High Frequency Converter Transducer
• Ausgabetyp : Dreifach
• Prinzip der Arbeit : Vector Control Transducer
• Switch Mode : PWM-Steuerung
• Spannung der Stromversorgung : Mittelspannungs Variable Frequency Drive-
• Link der Transformation : AC-DC-AC-Variable Frequency Drive
• Art der DC-Strom : Aktuelle Variable Frequency Drive-
• Funktion : Konstante Drehmoment Universal Type

• Trademark: DELIXI
• Packing: Standard Exporting Package
• Standard: CE, CCC
• Origin: Zhejiang China(Mainland)
• HS Code: 8504409999
• Production Capacity: 10, 000 Per Month

Product Name: 3 Phase Vector Control AC Drive 315KW Large AC Drive

* Dear friends, you can tell me your requirements, I will select models for you if needed.


1. "High precision", "high performance", "high cost-effective".
To satisfy the increasingly higher requirements on the industrial production of frequency inverters, Hangzhou Delixi develops a new E series frequency inverter aiming at the market demands. Compared with the old frequency inverters, its precision and performance are improved substantially besides its optimized structure and appearance. Its powerful built-in function may better fulfill the needs of different industries.

2. High control precision
Speed regulation scope
1: 100 (SVC) 1: 1000(VC)
Speed stabilizing scope
0.5%(SVC) 0.02%(VC)
Torque control precision
5% (VC)

3. Rapid torque response
SVC: Torque response < 20ms
VC: Torque response < 5ms

4. High starting torque

SVC: 0.5 Hz may provide 150% starting torque
VC: 0 HZ may provide 180% torque at zero speed

5. Various vector controls of motors are available

E180 Series may drive asynchronous motor and synchronous motor.

6. Diversified menu display modes

7. Function of built-in timer

It has two built-in timers to collect input timing signals and realize the output of timing signals. Such function may be used separately or in any combination.

8. Built-in virtual time-delay relay

It has 5 built-in virtual time-delay relays to conduct simple logic operation for multi-functional output terminals and digital input terminal signals. The logic result may be considered as equivalent to input terminal function and also may be output from the multi-functional output terminals. Moreover, the logic results may be conducted with time-delay and negation operations.

9. Function of built-in operating module

One quad operating module is built in. Such module may conduct simple addition, subtraction, multiplication, division, judgment of size and integral operations. Each operation has 4 input directing addresses and one output directing address. The input directing address is function code.

10. Function of rapid current limiter

In the case the current exceeds the current protection point, the rapid current limiter may keep the current within the current protection point to prevent frequently sending over-current alarm by the frequency inverter and protect the equipment.

11. Excellent capability of power drive control

The maximum drive capability of 24V output power of E-series frequency inverter, equipped with current limiting alarm function, may be 300mA.

The user may use it to supply power to text, touch screen, PLC and relay instead of connecting to an external switch.

	Item	Specification
Control	Control Mode	V/F control
		Open-loop Vector Control (SVC)
		Vector Control (VC) (Not applicable to E100/E102/EM60 series)
	Frequency Precision	Digital: 0.02%
		Analog: 0.1%
	V/F Curve	Linear, square root, any V/F
	Overload Capacity	G-type: 150% rated current for 60s; 180% rated current for 3s
		P-type: 120% rated current for 60s; 150% rated current for 3s
	Start Torque	G-type: 0.5Hz/150% (SVC); 0Hz/180% (VC)
	Speed Adjustment Range	1:100 (SVC) 1:1000 (VC)
		0.5% (SVC) 0.02% (VC)
	Torque Precision	5% (VC)
	Torque Compensation	Manual torque compensation (0.10%-30.0%); Automatic torque compensation
	Operating Mode	Key-board, terminal, RS485 communication
Basic Type Function	Frequency Source	14 main sources, 14 auxiliary sources.
		Easy switch between different modes.
		Diversified input modes for every source: keyboard potentiometer, external analog,
		digital setting, pulse frequency, multi-speed, simple PLC, communication, computing
		results, etc.
	Torque Source	14 torque sources, including digital setting, external analog, pulse setting,
		multi-order, communication, computing results, etc.
	Acceleration and Deceleration Time	4 groups of lines (can be switched through the option terminals); S Curve 1, S Curve 2
	Emergency Stop	Interrupt the output instantaneously
	Multi-speed	16-shift speeds at most; can be switched by different combination of order terminals
	Simple PLC	Continuous operation of 16-shift speeds; the acceleration/deceleration time, operating
		time and frequency source for every shift can be set separately
	Inching Control	Inching frequency and inching acceleration/deceleration time can be set separately;
		Inching can be prioritized in process.
	Rotating-speed Track	Track the start speed and operating speed of the inverter's load
	Length and Distance Control	Length and distance control through pulse inputs
	Counting	Counting through pulse inputs
	Swing Frequency	For winding machines in the textile industry
	Internal PID	Closed-loop process control system is available
	AV R	Ensure constant output in case of fluctuating grid voltage
	DC Brake	Quick and stable parking is available
	Slip Compensation	Compensate the slip deviation due to increased load
	Hopping Frequency	Prevent resonance with the load
	Droop Function	Balance the load rate of different motors which drive the same load
	Timing	Automatic stop at a given time

	Item	Specification
Enhanced Function	Internal Virtual Time Delay Relay	Simple logic programming for the multi-functional output terminals and the digital input terminals.
		The logic results can be equivalent to the digital input terminal function, and can be output through
		the multi-functional output terminals
	Internal Timer	Two internal timers to collect timing input signals and to output timing signals.
		The two timers can be used separately or together
	Internal Math	One internal 4-way math operation module for elementary arithmetic operations, numerical
	Operation Module	magnitude judgment and integral operation
Communication	E100	The control panel has a RS485 communication interface which supports standard MODBUS-RTU
		protocol
	E102/E180/EM60	The control panel does not have a RS485 communication interface, and an external 485
		communication expansion card shall be connected. Support standard MODBUS-RTU protocol. The
		E180-series also support standard PROFIBUS-DP protocol (through an external E180-DP expansion
		card).
Coder	E100	The coder can be connected directly through the DI5 and DI6 terminals on the control panel, and
		simple closed-loop control is available through PID control. Such connection is used in undemanding
		situations.
	EM60	The control panel does not have any interface for the coder, and a one-way high-speed pulser can be
		extended (through DI6).
	E102	The control panel only has one coder interface (DI6).
	E180	The control panel does not have any coder interface, and an external coder expansion card is
		necessary. The inverter supports ABZ incremental coder, UVW incremental coder and resolver. Such
		connection enables high-performance VC, and can be used in situations with demanding control
		precision requirements.
Motor	E100/E102	Only for asynchronous motors
	E180	For asynchronous motors and synchronous motors
Display	Operation Information	Given frequency, output frequency, output voltage, busbar voltage, input signal, feedback value,
		module temperature, and synchronous speed of the motor. At most 32 parameters can be displayed in
		cycle through the ">>" key.
	Fault Information	In the fault protection mode, three pieces of history fault information can be saved. Every piece
		includes the frequency, current, busbar voltage and I/O terminal status when the fault takes place.
Protection	Inverter Protection	Over-current, over-voltage, module fault protection, under-voltage, overheat, overload, external fault
		protection, EEPROM fault protection, ground protection, and default phase
	Inverter Alarm	Locked-rotor protection, overload alarm
	Instantaneous Power Down	Less than 15 ms: continuous operation
		More than 15ms: automatic restart
Environment	Ambient Temperature	-10ºC~ 40ºC
	Storage Temperature	-10ºC~ 40ºC
	Ambient Humidity	Max. 90% RH (No condensation)
	Altitude/Vibration	Below 1000m; below 0.6g
	Working Place	No corrosive gas, inflammable gas, oil mist or dust
	Cooling	Force-air cooling

Operation	Operation Control Mode	Keyboard/External Terminals/RS485 Communication
	Start Mode	Current Limit/ Voltage/ Heavy-load
	Start/Stop Time	Digital Settings
	Start Delay	Digital Settings
	Emergency Stop	Interrupt the output of the soft starter
	Current Limit	Start current below this value in the current limit and heavy-load modes
	Start Voltage	Start voltage can be set digitally in the voltage mode
	Light-load Control	Belt tripping can be detected
	Restart	Restart automatically after stopped due to fault
	Fault Output	Contact output:
	Multi-functional Relay Output	Start delay, start, operation, stop, complete stop, restart
	Analog Output	0-20mA/ 4-20mA, optional
Protection	Soft Starter Protection	Over-current, overload, overheat, three-phase imbalance, default phase, light-load, external fault
	Soft Starter Alarming	Emergency stop, light-load, restart
Display	Keyboard
	Operation Information	Ready, start delay, start, operation, stop, fault alarm
	Parameter Protection	Protect the parameters from being altered
Working Conditions	Type	AC-53b 660V Rated Impact-withstanding Voltage: 4kV
	Rated Insulation Voltage	CDRA011T4~CDRA055T4: IP20
	Degree of Protection	CDRA075T4~CDRA600T4: IP00
Environment	Ambient Temperature	-10ºC~ 40ºC
	Storage Temperature	-20ºC~ 65ºC
	Ambient Humidity	90% RH at most (No condensation)
	Altitude/Vibration	<1000m;<5.9m/s2 (=0.6g)
	Working Place	No corrosive gas, inflammable gas, oil mist, or dust
	Cooling	Natural Cooling

Model	Brake Unit	Brake Resistance	Power (W)
CDI-EM60G0R4S2B	Internal, Max. Current of 8A	400	80
CDI-EM60G0R75S2B	Internal, Max. Current of 8A	200	160
CDI-EM60G1R1S2B	Internal, Max. Current of 8A	160	200
CDI-EM60G1R5S2B	Internal, Max. Current of 15A	120	250
CDI-EM60G2R2S2B	Internal, Max. Current of 15A	80	400
Model	Brake Unit	Brake Resistance	Brake Resistor Power (W)
	S2 (Single-phase 220V)
CDI-E100G0R4S2B	Internal, Max. Current of 8A	400	80
CDI-E100G0R75S2B	Internal, Max. Current of 8A	200	160
CDI-E100G1R5S2B	Internal, Max. Current of 15A	120	250
CDI-E100G2R2S2B	Internal, Max. Current of 15A	80	400
	T2 (Three-phase 220V)
CDI-E100G0R4T2B	Internal, Max. Current of 8A	400	80
CDI-E100G0R75T2B	Internal, Max. Current of 8A	200	160
CDI-E100G1R5T2B	Internal, Max. Current of 15A	120	250
CDI-E100G2R2T2B	Internal, Max. Current of 25A	80	400
	T4 (Three-phase 380V)
CDI-E100G0R75T4B	Internal, Max. Current of 8A	600	160
CDI-E100G1R5T2B	Internal, Max. Current of 8A	400	250
CDI-E100G2R2T4B	Internal, Max. Current of 15A	250	400
CDI-E100G3R7T4B	Internal, Max. Current of 15A	150	600
CDI-E100G5R5/P7R5T4B	Internal, Max. Current of 40A	100	1000
CDI-E100G7R5/P0R11T4B	Internal, Max. Current of 40A	75	1200
CDI-E100G011/P015T4BL	Internal, Max. Current of 50A	50	2000
CDI-E100G015/P018.5T4BL	Internal, Max. Current of 75A	40	2500
CDI-E100G0185/P022T4	Internal, Max. Current of 50A Connect to External CDI-BR-50	30	4000
CDI-E100G022T4	Internal, Max. Current of 50A Connect to External CDI-BR-50	30	4000
Model	Brake Unit	Brake Resistance	Brake Resistor Power (W)
	T2 (Three-phase 220V)
CDI-E180G0R4T2B	Internal, Max. Current of 10A	350	160
CDI-E180G0R75T2B	Internal, Max. Current of 10A	300	160
CDI-E180G1R5T2B	Internal, Max. Current of 25A	100	250
CDI-E180G2R2T2B	Internal, Max. Current of 25A	75	400
CDI-E180G3R7T2B	Internal, Max. Current of 40A	45	600
CDI-E180G5R5T2B	Internal, Max. Current of 50A	30	1000
CDI-E180G7R5T2BL	Internal, Max. Current of 75A	20	1200
CDI-E180G011T2	Internal, Max. Current of 50A (Connect to External CDI-BR-50)	16	2000
CDI-E180G015T2	CDI-BR-100	12	2500
CDI-E180G018.5T2	CDI-BR-100	20/2	4000
CDI-E180G022T2	CDI-BR-100	16/2	4000
CDI-E180G030T2	Internal, Max. Current of 75A (Connect to External CDI-BR-50)	13.6/2	6000
	T4 (Three-phase 380V)
CDI-E180G0R75T4B	Internal, Max. Current of 10A	600	160
CDI-E180G1R5T4B	Internal, Max. Current of 10A	400	250
CDI-E180G2R2T4B	Internal, Max. Current of 15A	250	400
CDI-E180G3R7/P5R5T4B	Internal, Max. Current of 25A	150	600
CDI-E180G5R5MT4B	Internal, Max. Current of 40A	100	1000
CDI-E180G5R5/P7R5T4B	Internal, Max. Current of 40A	100	1000
CDI-E180G7R5/P011T4B	Internal, Max. Current of 40A	75	1200
CDI-E180G011MT4B	Internal, Max. Current of 50A	50	2000
CDI-E180G0011/P015T4BL	Internal, Max. Current of 50A	50	2000
CDI-E180G015/P018.5T4BL	Internal, Max. Current of 75A	40	2500
CDI-E180G018.5/P022T4	Internal, Max. Current of 50A (Connect to External CDI-BR-50)	30	4000
CDI-E180G022/P030T4	Internal, Max. Current of 75A (Connect to External CDI-BR-50)	30	4000
CDI-E180G030/P037T4	Internal, Max. Current of 50A (Connect to External CDI-BR-50)	20	6000
CDI-E180G037/P045T4	CDI-BR-100	16	9000
CDI-E180G045/P055T4	CDI-BR-100	13.6	9000
CDI-E180G055/P075T4	CDI-BR-100	20/2	12000
CDI-E180G075/P093T4	CDI-BR-200	13.6/2	18000
CDI-E180G093/P110T4	CDI-BR-200	20/3	18000
CDI-E180G110/P132T4	CDI-BR-200	20/3	24000
CDI-E180G132/P160T4	CDI-BR-200	20/4	36000
CDI-E180G160/P185T4	CDI-BR-400	13.6/4	45000
CDI-E180G185/P200T4	CDI-BR-400	13.6/5	45000
CDI-E180G200/P220T4L	CDI-BR-400	13.6/5	54000
CDI-E180G250/P280T4L	CDI-BR-400	13.6/6	54000
CDI-E180G280/P315T4L	CDI-BR-400	13.6/6	54000
CDI-E180G315/P355T4L	CDI-BR-400	13.6/6	54000
CDI-E180G355/P375T4L	CDI-BR-400	13.6/6	54000
CDI-E180G375T4L	CDI-BR-400	13.6/6	63000
CDI-E180G400T4L	CDI-BR-600	13.6/7	63000
CDI-E180G400T4L	CDI-BR-600	13.6/7	72000
CDI-E180G500T4L	CDI-BR-600	13.6/8	72000
CDI-E180G500T4L	CDI-BR-600	13.6/8	81000
CDI-E180G630T4L	CDI-BR-600	13.6/9	81000
CDI-E180G200T4L	CDI-BR-600	13.6/9	90000
CDI-E180P250T4L	2 CDI-BR-400	13.6/10	18000

WHY CHOOSE US?

Q1.Are you manufacturer or trading company?
A.We are the only manufacturer of electrical products.
Welcome to visit our factory at any time.

Q 2. what's the payment term?
A. We accept T/T, L/C, WESTERN UNION

Q 3. What's the delivery time ?
A. Normal model 1-3days,because we have ability to do the stock.
For big order,it takes about 15-20days.

Q 4. What is the standard of package?
A. Export standard package or special package according to customer requirement
.
Q 5. what kind of product quality your factory offer?
A. We are top 3 from Chinese market.We offer top quality to help client to get more market.

Q 6. Do you accept OEM business?
A. We do OEM .
Q 7.Which market do you already sell?
A.We already ship to Middle East, Asia, Russia ,Afria etc.

Q8. what kind of certificate you have ?
A.We have ISO9001, CE, CCC,etc.

» » »